Studer Vista 1 Operating Instructions Manual Download Page 229

Page: 229 / 401

Vista 1 Digital Mixing System

GC Operation 4-53

Document generated: 18.04.17

SW V5.3

4.4.5

Cue list / Theatre Cue list

Two different cue list functionalities are available that allow sorting snaps-

hots and attaching MIDI, HiQNet and other events to each one of them.

Each title can contain only one single cue list. It can be controlled from

external controllers using MIDI. It is possible to use standard ‘MIDI show

control’ commands as well as recalling certain cues with a user-defined

MIDI command (note or program change).

The Theatre Cue list is only

available in ‘static’ mode, hence not when dynamic automation is active.

The Cue List page of the graphical controller can be called up in three different

ways:

• From the

View button

, by clicking on the appropriate icon

• Using the

Quick Access Toolbar

icons, by clicking on the appropriate icon;

• Using the

CUE LIST

function key on the console – which is probably the

fastest way.

4.4.5.1

‘Standard’ Cue list

The cue list helps to deal with parts of a musical piece or film you want to

keep track of in time. That could be items such as Intro, Chorus A, Bridge,

Chorus B, the End of a song, or a scene from the film you might want to

(auto-) locate to. An unlimited number of cues can be stored.

Each cue in the cue list has a timecode stamp and a name. The names are

generated and numbered automatically when making cues, but may be edited

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands