Studer Vista 1 Operating Instructions Manual Download Page 74

Page: 74 / 401

Vista 1 Digital Mixing System

2-34 Desk Operation

Document generated: 18.04.17

SW V5.3

2.2.5.9

Control and Mute Group setup

2.2.5.9.1

Control Group Setup

SETUP: GROUPS

Pressing this key will enter/exit control group

and

mute group mode.

After having entered

SETUP: GROUPS

, the user selects the control group

he wants to edit by pressing

LINK / SEL

on the corresponding control group

master channel. Then the desired channels are added to or removed from the

control group by pressing their

LINK / SEL

key. The 7-segment display next

to the channel fader indicates the control group number.

The control group assignment is saved within each snapshot, therefore the

assignment may change from snapshot to snapshot.

The

MULTISEL

key is active as standard, thus allowing to select and de-select

individual channels. Clearing the entire definition of a control group is easily

done by pressing the

MULTI SEL

key, so that it gets dark. After that, any press

LINK / SEL

of any channel will clear all others. It is also possible to add

multiple channels to a control group: Press and hold one

LINK / SEL

key and

press another one on a different channel. All channels in between will be

added to the control group.

2.2.5.9.2

Mute Groups

SETUP: GROUPS

Pressing this key will enter/exit control group

and

mute group mode.

Vista 1 provides up to 16 mute groups.

MUTE GROUPS M1...M8

have dedicated

keys on the left side of the control bay.

The additional mute groups M9...M16 may be operated using eight of the 16

monitoring source selectors.

M 9

M 13

M 10

M 14

M 11

M 15

M 12

M 16

Use of these keys (either as monitoring source or as mute group selectors) is

defined in the ‘Option: Vista Settings’ menu, as shown below.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands