Studer Vista 1 Operating Instructions Manual Download Page 365

Page: 365 / 401

Vista 1 Digital Mixing System

RELINK 8-9

Document generated: 18.04.17

SW V5.3

If this happens (on a single channel, or also on several channels at the same

time), a warning message appears on the GC screen:

This is the warning window that shows all I/O Sharing events. It disappears

after confirmation with

8.4 Vista Restrictions

• Signaling, such as red light or fader start, is

not

combined with I/O Shar-

ing.

• Vista systems cannot have any ‘NETInputs’ configured.

• 96 kHz sampling rate configurations on Vistas can only be used when

OnAir console and no Router

is involved in the RELINK network. As long

as only Vista systems are within the RELINK network, 96 kHz configura-

tions can be used. However,

all Vistas

then need to run at 96 kHz.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands