Studer Vista 1 Operating Instructions Manual Download Page 323

Page: 323 / 401

Vista 1 Digital Mixing System

GC Operation 4-147

Document generated: 18.04.17

SW V5.3

Clicking on the

Map Currently Selected

button maps the patches for the

selected targets (the pink-colored ones) to the Pro-Bel connect command

specified on the left.

With

Listen to messages

enabled, incoming connect messages are mapped

to the edit fields on the dialog. To select targets affected by this connect

command simply click on them in the target list of the general patch (color

is set to pink).

Make sure to always associate the same Pro-Bel destination to the same set

of targets.

Any connection on the patch may be mapped to certain Pro-Bel connect

commands. You are not limited just to outputs or inputs!

With

Send spontaneous messages

enabled, the corresponding CON -

NECTED message is sent whenever one of the defined patch combinations

matches the same combination as when they were defined.

Files Used to Save Pro-Bel Set-up

The system creates human-readable files (ini format) in the

D950System

directory to save the set-up. The files are named according to the COM port

used:

PortX.Pro-Bel

– with X being the COM port used.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands