Studer Vista 1 Operating Instructions Manual Download Page 133

Page: 133 / 401

Vista 1 Digital Mixing System

Parameters 3-21

Document generated: 18.04.17

SW V5.3

3.3.10 Graphic EQ Parameters

There is

no global view

of the graphic EQ available, since the graphic EQ of

one channel always uses up the complete Vistonics screen. For graphic EQ

operation please refer to

chapter 3.4.2.

3.3.11 Panning Parameters

Press

GLOBAL VIEW: PAN

This view enables the user to control the

most important

parameters of the pan-

ning section. Representation is different depending on channel type (mono/

stereo/5.1/stereo upmix), and on the selected panning format. The

complete

parameter set is available on the channel-related pan view, refer to

chapter

3.4.4

. There you will also find all parameter details.

The panning section can be activated with the

PAN

hardware key above the

Vistonics section, in addition to the different, individual on/off keys.

Mono Channel: Stereo Channel: 5.1 Channel: St.Ch.Upmix LR: St.Upmix 5.1: St.Upmix 5.1 W.:

The DIR WIDTH display on stereo channels only appears if this feature has

been configured for the corresponding channel.

If a channel is configured with the ‘Input Dir/Bal’ function, this view also

displays the input balance function placed within the input section of the

channel.

Summary of Contents for Vista 1


















































































































































































































































































































































































































Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands

Studer Vista 1, Operating Instructions Manual

Search results

Summary of Contents for Vista 1

Reviews:

Related manuals for Vista 1

Brands by name

Popular brands