Standard Horizon CP390i, Owner'S Manual

Page: 76 / 168

CP390i and CPF390i Page 77
9. ROUTES
The CP190i and the CPF390i have the capability to store 50 Routes with 100 Waypoints
or Marks in each Route. A Route can consist of Waypoints or Marks. The difference is when
a Route is made using Waypoints and the Route is deleted the Waypoints are also deleted.
However if a Route is made of Marks and the Route is deleted the Marks stay in memory.
NAVIGATION LINE
(or DESTINATION Line)
STARTING Position
SHIP
Navigation Course
WPT002
PERPENDICULAR TO
THE NAVIGATION LINE
When the Ship passes the
perpendicular of the
NAVIGATION LINE, the
Destination is moved to then
next Waypoint in the Route
WPT001
(Destination)
Figure 9 - Example to show how the plotter switches from one Waypoint to another
9.0 CREATING A ROUTE USING WAYPOINTS
1. On the Chart page move the ShuttlePoint knob to the Lat/Lon of the starting Waypoint
in the Route.
2. Press [ROUTE] , you will notice the Starting Waypoint will be placed under the
cursor.
3. Move the ShuttlePoint knob to the second Lat/Lon of the next leg in the Route.
4. Press [ROUTE] . You will notice another Waypoint is shown under the cursor and a line
joins the starting Waypoint to the Second Waypoint.
WAAS 3D
Figure 9.0 - Creating a Route using Waypoints
5. Repeat steps 3 and 4 until all Waypoints are entered into the Route.