Standard Horizon CP390i, Owner'S Manual

Page: 70 / 168

CP390i and CPF390i Page 71
WAAS 3D WAAS 3D
Figure 7.1.1 - Moving Mark or Waypoint (1)
4. Press [ENT] ( [CLR] to abort the move), the Waypoint appears in the new position.
WAAS 3D
Figure 7.1.1a - Moving Mark or Waypoint (2)
7.2 MARKS/WAYPOINTS LIST
The MARKS/WPTS List shows all the Marks and Waypoints that have been stored into the
GPS Chart Plotter. This page also allows you to:
ICON Allows sorting by icon type. Selections are:
a. SELECT - Only User Points with the selected icon are shown
b. ALL - All User Points are shown
FIND Searches through the Marks or Waypoints to find a point by name using the ShuttlePoint knob
LOCATE Shows the position of a Mark or Waypoint on the Chart page
EDIT Allows you to edit a previous stored Mark or Waypoint
SORT Allows sorting the name of User Points. Selections are:
a. A-Z ASCENDING - Sorts the name of the Mark or Waypoint in ascending order
b. Z-A DESCENDING - Sorts the name of the Mark or Waypoint in descending order
NEW MARK Allows you to create and edit a new Mark. Useful when entering many Marks from a list.
MODE This selection controls how the Marks or Waypoints are shown on the Chart page. Selections are:
a. SHOW - icon and name are shown
b. ICON - only icon (no name) is shown
c. HIDE - Mark or Waypoint is hidden
d. SHOW ALL - All Marks or Waypoints are shown
e. ICON ALL - All Icons are shown without name
f. HIDE ALL - All Marks or Waypoints are hidden
DELETE Allows to delete the selected point.
DEL ALL Allows to delete all stored points.
SEND* Sends the stored points to a external device (PC) capable of listening to NMEA WPL and RTE
sentences.
RECEIVE* When selected, receives points from an external device (PC) that is capable of sending NMEA
WPL sentence.
NOTE*
The SEND and RECEIVE functions are used to receive or transmit User Points (Marks and
Waypoints) to and from a Personal Computer (see also Par. 2.9).