REFLECTOMETER
52
Fig.53
In Fig.53:
1 - REF is on
2 - the connected pair of wires
3 - "hot" buttons
4 - SET 1 table (in the drawing - the table is active)
5 - numbers of responses
6 - distances to heterogeneity
7 - response levels from heterogeneity
8 - SET 2 table (in the drawing - the table is passive)
9 - the set value of Shortening Factor
Available actions:
assessment of the response level and the distance to the heterogeneity in the connected
pair;
comparison of results of two measurements;
Shortening Factor setting.
Controls:
Button
Action
Setting of the active table
F1, ESC
Turning off MANUAL mode (go to the REF main menu)
F2
Setting on/off Shortening Factor
F3
Turning oт the single test (in the active table)
MODE
Go to the Analyzer main menu
FUNC
Turning on SWITCH SETTING mode
F4, ENTER
Are not used
