SOFTWARE
80
Fig.62А
Fig.62В
On the left part of the window there is a menu for configuring the Switch when testing a
"Twisted pair" type cable (Fig.62A), on the right part - "Non-twisted pair" type cable (Fig.62В).
At the bottom of the window is a button for connecting (disconnecting) the cable shield to the
switch. The switch setup procedure is similar to that presented in item 4.
To select the cable type and pin number, click the corresponding button.
The set parameters do not change when switching devices and remain until the next correction
or turning off the Analyzer.
When the Switch setup is finished click
(Fig.61, item 5).
In the window (Fig. 61, item 11) displays the contacts configuration.
Not connected pairs are marked by gray color, connected pair are marked by white color, and
the connected "linked pairs" (two wires from the same twisted pair) are marked by blue color.
8.2. LFA
To enable LFA click
PC screen shown in Fig.63.
Fig.63
