CONNECTING TO WIRE LINES
13
2. CONNECTING TO THE CABLES
2.1. CONNECTING TO THE POWER MAINS
The Analyzer connected to the power mains using an adapter
(Fig.1, item 7).
The scheme of connection is shown in Fig.3.
Fig.3
The adapter (in the plug) is connected to the socket of the tested cable, other end of the cable
is connected to the slot of "INPUT" of the main unit.
The LED indicator on the adapter shows existence or lack of voltage in the tested cable.
2.2. CONNECTING TO THE LAN CABLE
The LAN cables can be equipped with RJ45 plugs or RJ45 sockets.
2.2.1. CONNECTING TO THE LAN CABLE EQUIPPED WITH RJ45 PLUGS
When testing LAN cable, without the need for parallel connection of terminal devices, the LAN
cable equipped with a plug of RJ45 is connected directly to the slot of "INPUT" of the main unit.
The scheme of connection is shown in
Fig.4, 2A option.
If test assumes parallel connection of terminal devices (PC, network printer, etc.), are used:
patch cord
(Fig.1, item 20)
;
RJ45 splitter
(Fig.1, item 12)
;
RJ45 socket
(Fig.1, item 14)
.
The scheme of connection is shown in
Fig.4, 2B option.
Fig.4