INTERFACE SETTINGS
22
In Fig.22:
1 - device (such as WR) is on
2 - power mains test mode indicator
3 - connected wire pair indicator
4 - accumulator charge level indicator
5 - current time in a format "HH:MM"
3.4. SETTINGS (SERVICE MODE )
This mode is design to set the date, time and interface language (Russian or English).
To activate the mode, use the
or
buttons or in the main menu to set the tabular cursor to
the item "SETTINGS" and press "ENTER".
For exit to the main menu, press "ESC". Confirmed parameter changes when exiting the
"SETTINGS" mode are saved, including when the power is turned off.
The screen of the "SETTINGS" mode is shown in Fig.23.
Fig.23
3.4.1. DATE SETTING
Using the
or
buttons, set the cursor to the "DATE" item and press "ENTER". The date
setting menu (Fig.24) in the "DD-MM-YYY" format will appear on the screen.
Fig.24
Use the or buttons to set the cursor to the "DAY" menu item and use the
or
buttons to set the desired value. The values "MONTH" and "YEAR" are set in the same method.
To confirm the set values, press "ENTER". Exit from the "SETTINGS" mode without save the
changes - "ESC".
