WIRED RECEIVER
42
5.2.8. SIGNAL ANALYSIS AT A FIXED FREQUENCY (IN AUTOMATED MODE)
To enable the Analysis, it is necessary to set the tabular cursor on the row of the
corresponding signal and press the “ENTER”. The font color in the row will change from white to
green. The color of the signal level indicator changes from gray to green.
The screen view is shown in Fig. 47.
Fig.47
Available actions:
sorting of the detected signals (on frequency or on level);
quick setup for the detected signal by selecting it in the table;
frequency control;
signal analysis at a fixed frequency;
possibility of using AM/FM demodulators;
possibility of using an OSCILLOSCOPE;
possibility of using an attenuator (20 dB);
gain setting (x1, x2, x4).
Controls:
Button
Action
Tabular cursor move
Frequency control
FUNC
Sorting of signals
F1
Are not used
F2
Switching AM/FM demodulators
F3
Turning on OSCILLOSCOPE
F4
Turning on/off an attenuator. GAIN SETTING (x1, x2, x4)
ENTER
Turning off SIGNAL ANALYSIS AT A FIXED FREQUENCY
ESC
Go to WR main menu
MODE
Go to the Analyzer main menu
The operation of the OSCILLOSCOPE is described in
