ELECTRONIC SWITCH SETTING
24
4. ELECTRONIC SWITCH SETTINGS
Before testing a multi-wire cable, it is necessary to determine its type.
Press "FUNC" for cable type selecting:
"twisted pair" type cable (one, two, three or four pairs of wires);
multi-wire cable (the maximum quantity of wires in the cable - eight).
The set parameters of a cable remain invariable for all modes (regardless of in what mode they
were set) before the following correction or turning off the Analyzer.
The cable settings menu of the "twisted pair" type is shown in Fig.26
Fig.26
In Fig.26:
1
- "twisted pair" type cable setting indicator
2
- indicator of the input contacts in the Switch socket (RJ45) - the used contacts are
displayed in red, the unused contacts in black
3-6 - indicators of the number of twisted pairs in the connected cable (the indicator with a
white background shows the connected number of twisted pairs)
7
- "non-twisted pair" type cable indicator
8
- indicator of connection of the cable shield
Controls:
Button
Action
Switching for setting "non-twisted pair" type cable
Setting the number of wire pairs
F1
Connect / disconnect cable shield
ESC, FUNC
Go to the A
nalyzer
main menu
F2, F3, F4,
MODE, ENTER
Are not used
