SOFTWARE
91
SCALING THE TIME AXIS OF THE OSCILLOSCOPE
There are two methods of scaling:
1. Click on
(Fig.70, item 14). A list of values is displayed on the screen:
To select a value, click on the corresponding field. The indicator displays the selected value
2. Use the
(decrease value) and
(increase value) buttons.
MODULATION TYPE SETTING
Click
(Fig.70, item 15). A list will appear on the screen:
To select the type of modulation, click on the appropriate field
.
8.3.7. AUTOMATED MODE
In AUTOMATED mode, a list of signals is generated whose levels exceed the adaptive detection
threshold. To turn on the mode, click
(Fig. 70, item 12).
The button will take the form:
.To turn off the mode, click this button again.
Testing in AUTOMATED mode is performed:
1.
within the set viewing range;
2.
taking into account the results obtained in the DIFFERENTIAL mode (if the inclusion was
made from the DIFFERENTIAL mode);
3.
only in the connected pair of wires.
The screen is shown in Fig.71.
