WIRED RECEIVER
40
Fig.45
In Fig.45:
1 - WR is on
2 - the value of dividing of the time axis
3 - OSCILLOSCOPE is on
Available actions:
determination of the timing parameters of the demodulated signal;
listening of a signal on AM and FM;
gain setting (x1, x2, x4);
possibility of using an attenuator (20 dB).
Controls:
Button
Action
Changing of scale division interval of horizontal sweep
100µS/200µS/500µS/1mS/2mS/5mS/10mS
F2
Switching AM/FM demodulators
F3
Turning off OSCILLOSCOPE
F4
Turning on/off an attenuator. GAIN SETTING (x1, x2, x4)
ENTER
Turning off SIGNAL ANALYSIS AT A FIXED FREQUENCY
ESC, MODE
Go to the Analyzer main menu
F1, FUNC
Are not used
5.2.7. AUTOMATED MODE
In AUTOMATED mode, all signals are fixing whose amplitude exceeds the adaptive detection
threshold. AUTOMATED mode is activated from the WR main menu (5.2.3) or the DIFFERENTIAL
mode menu (5.2.4). Signals are searched within the viewing range and taking into account the
results of the DIFFERENTIAL mode (if the AUTOMATED mode was switched from the
DIFFERENTIAL mode). To turning on the AUTOMATED mode, press the "F2". The view of the
screen after turning on the mode is shown in Fig.46.
