SOFTWARE
107
Message
Explanations
In the file - more than 3v. In
the current data - the noise.
In the saved file, a voltage greater than 3V was recorded on this
pair. An unacceptable "noise" level was detected on this pair in
the current measurement cycle.
In the file - the noise. In the
current data - no defects.
In the saved file, an unacceptable level of "noise" was detected
on this pair. In the current measurement cycle, this pair did not
have a single response.
In the file - more than 3v. In
the current data - no defects.
In the saved file, a voltage greater than 3V was recorded on this
pair. In the current measurement cycle, this pair did not have a
single response.
In the file - there are defects.
In the current data - no
defects.
In the saved file, at least one response from heterogeneity was
received on this pair. In the current measurement cycle, this
pair did not have a single response.
Different tables of defects!
Parameters of heterogeneities in the saved file and in the results
of current measurements are different
8.5.8. REPORT mode
To create report files click
The menu will be displayed on the screen (Fig. 86)
with a list of information that can be saved.
Fig.86
When using REF, it is possible to save (Fig.86):
1. Graphic information as PNG format files ("Screens"):
Reflectogram screenshot ("Graph" check box)
Switch table screenshot ("Switch" check box)
2. Tabular data as MS Excel files ("Tabs").
results of the last measurement on one pair ("Defects table" check box)
measurement results for all cable pairs ("All pairs" check box)
comparison of the results of two measurements on one pair ("Compare data" check box).
Saving is available only when the "Compare mode" is on (item 8.5.7).
