NON-LINEAR JUNCTION DETECTOR
47
5.3.3. PROBING SIGNAL LEVEL SETTING
It is necessary:
Press "F2". The indicator’s field (Fig.50, item 5) will become lighter;
By means of the
or
buttons to set value of gain in % (20, 40, 60, 80, 100) which is
displayed on the indicator (Fig.50, item 5);
Press "F2" (finish setting). The indicator’s field (Fig.50, item 5) will become darker.
The value of the probing signal level does not change until the next setting or turn off the
Analyzer.
