WIRED RECEIVER
41
Fig.46
In Fig.46:
1 - WR is on
2 - quantity of the detected signals
3 - "hot" buttons
4 - the tabular cursor
5 - numbers of the detected signals
6 - frequency of the detected signals
7 - the level of the detected signals
8 - position of the cursor relative to the number of rows in the table
9 - the signal level (on which the cursor is set)
Available actions:
sorting of detected signals (by frequency or level);
fast tuning to the detected signal by selecting it in the table;
possibility of using an attenuator (20 dB);
gain setting (x1, x2, x4);
signal analysis at a fixed frequency;
switching AM/FM demodulators;
use an OSCILLOSCOPE.
Controls:
Button
Action
Tabular cursor move
FUNC
Sorting of signals
F1
Are not used
F2
Switching AM/FM demodulators
F3
Turning on OSCILLOSCOPE
F4
Turning on/off an attenuator. GAIN SETTING (x1, x2, x4)
ENTER
Turning off SIGNAL ANALYSIS AT A FIXED FREQUENCY
ESC
Exit from the AUTOMATED mode (step backwards)
MODE
Go to the Analyzer main menu
