WIRED RECEIVER
43
5.2.9. LOW-CURRENT CABLES TESTING
WR FUNCTIONAL DIAGRAM (LOW-CURRENT CABLES TESTING)
After selecting the cable type ("Low voltage") and the frequency range, a table will be displayed
on the screen (Fig. 48), in which all combinations of pairs of cable wires are displayed.
The maximum quantity of the tested wires is 9 (8 wires and the screen shield).
Fig.48
In Fig.48:
1 - WR is on
2 - the connected pair of wires
3 - turning on the PANORAMA mode for the analysis of signals in the connected pair
4 - the tabular cursor
5 - numbers of pairs of wires
