Sony DVS-7300, User Manual

Page: 59 / 606

Chapter 2 Location and Function of Parts
2-27
AUX DELEGATION
AUX
1
AUX
2
AUX
3
AUX
4
AUX
5
AUX
6
AUX
7
AUX
8
AUX
9
AUX
10
AUX
11
AUX
12
AUX
13
FDIT
PVW
FRAME
MEM
1
FRAME
MEM
2
M/E
UTIL
V/K
SHIFT
M/E
1
M/E
2
M/E
3
SHIFT
COLOR
BKGD
BLACK
AUX
Auxiliary bus bank
The auxiliary bus bank controls the
selection of signals output from the unit,
and of signals used for video masking.
Auxiliary Bus Bank
1 Cross-point buttons
The leftmost 29 cross-point buttons in
each row are allocated to the same signals
as the cross-point buttons in the M/E
banks (and PGM/PST bank on the BKDS-
7021/7022/7023). At the right, there are
also three reentry buttons (M/E-1, M/E-2,
and M/E-3) to select the output from any
of the M/E banks.
The 29 buttons from the left act as buttons
numbered 0 to 28 when the SHIFT button
5 is not pressed. When the SHIFT button
is held down, these buttons select the
signals numbered 30 to 58. If, however, in
a setup menu you have allocated the 29th
button from the left as a shift button, then
the same operation as with the M/E cross-
point button is possible.
The cross-point buttons serve a total of 19
buses, including AUX 1 to AUX 13 and
the edit preview bus. Before selecting the
signal, delegate the cross-point buttons
with the appropriate delegation button
3 .
2 Source name display
This displays the identifiers of the signals
which can be selected with the cross-point
buttons. When there are two signals
allocated to a cross-point button, hold
down the SHIFT button
5 to show the
identifiers assigned to the shifted buttons.
Holding down the shift button in the cross-
point button row also displays the
identifiers assigned to the shifted buttons.
If you are using the switcher and a DVS-B
series routing switcher connected by a
BKDS-7700, the signal names set on the
routing switcher can be displayed.
1
Cross-point buttons
2 Source name display
3 Delegation buttons
4 Selected signal display
6 Programmable
button
5
SHIFT button
7 PV/K button