Sony DVS-7300, User Manual

Page: 68 / 606

2-36
Chapter 2 Location and Function of Parts
MENU SRCE TRGT
ASP
SKEW
PERS
LOC
SIZE
LOC
XYZ
ORTHG
AXIS
LOC
ROT
X Y Z
CLR
WORK
BUFR
CTR
VELO
HOLD
3
Trackball
1 Function allocation
buttons
4
Z-ring
2 Operating buttons
DME Control Section (BKDS-7031 DME
Control Panel Unit – Option)
DME control section
In addition to DME operations, the
optional DME control panel unit can be
used for wipe pattern positioner operations
on the switcher and VTR tape transport
control.
1
Function allocation buttons
Allocate the overall functions of the DME
control panel as follows.
SRCE (source): Allocate to operations in
the DME source coordinate system.
TRGT (target): Allocate to operations in
the DME target coordinate system.
For details of the effect of controls 2 to
4 when the SRCE or TRGT button is
pressed and lit, refer to the BZDM-7720/
3720 User’s Guide.
MENU: Allocate to knob operations in the
menu control section. This button also
lights when allocated to the wipe
pattern positioner.
ORTHG (orthogonal or VTR control):
Allocate to VTR tape transport control.
To use the ORTHG button for tape
transport control, in the setup menus a
setting is necessary for using this
button as a VTR button. For details,
see the section “Changing switcher
functions (OPERATION MODE
menu)” (page 14-66).
When the setting to use this button as a
VTR button is not made, this button
functions as one of the operating
buttons
2 .