Sony DVS-7300, User Manual

Page: 470 / 606

14-14
Chapter 14 Setup
Creating different cross-point assignment tables
To create the data for the five cross-point assignment tables, use the
following procedure.
Note that for the cross-point assignment table of the PANEL1 port, you can
also make assignments in the XPT ASSIGN menu (see page 14-63).
1
In the MULTI XPT ASSIGN menu, press one of F6 (1) to F10 (5), to
select the table to which the settings apply.
The XPT ASSIGN menu appears.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
INHIBIT
SELECT
BUTTON
No.
SOURCE
SELECT
#3
Function key indications in the XPT ASSIGN menu
2
Referring to the section “Carrying out setup relating to assigning an input
signal to a cross-point button” (page 14-62), carry out the assignments.
For the input signal identifiers or the key source signal assignments, use
the separate XPT ASSIGN menu (see page 14-63). It is not possible to
set these in this menu.
Repeat steps
1
and
2
as required to create all of the tables.
Setup Relating to the Overall Switcher System (SYSTEM Menu)