Sony DVS-7300, User Manual

Page: 373 / 606

Chapter 8 Key Frame Effects
8-39
Settings on the switcher
With the disk recorder to be controlled as DEVICE 1, make the following
settings in the P2&GPI timeline menu, and save as EFFECT #1.
EFFECT #1
KF#1:RECALL #2(DEVICE#1), KF DURATION:0.00
KF#2:TRIGGER #1(DEVICE#1), KF DURATION:10.00
KF#3:TRIGGER #4(DEVICE#1), KF DURATION:1.00
Recalling and executing
Use the following procedure.
1
On the switcher recall EFFECT #1.
This outputs the KF#1 RECALL command, and Cue Point Register #2 of
the controller is recalled, and the disk recorder is cued up to the specified
clip name and timecode value.
KF#1 is carried out on recall if the R & R (Recall & Rewind) mode is
set.
2
In the key frame control section, press the RUN button.
Since KF DURATION is set to 0.00, the KF#2 TRIGGER#1 command is
immediately output, the controller converts the PLAY command, and the
disk recorder starts playback.
After 10 seconds, the KF#3 TRIGGER#4 command is output, the
controller converts the STOP command, and the disk recorder stops.
For example, to execute KF#2 one second after pressing the RUN button,
set KF#1 KF DURATION to 1.00. In this case again, KF#1 is not
executed.