Sony DVS-7300, User Manual

Page: 531 / 606

Chapter 14 Setup
14-75
4
Carry out the operation shown in the following table corresponding to the
desired setting.
Setting Operation
Setting the operating
mode for the FlexiPad Press F1 (FLX PAD MODE).
This cycles the setting through MODE1, MODE2, and
MODE3.
Setting the linkage
between the transition
type selection buttons
and the FlexiPad Press F2 (FLX PAD AUTO SELECT).
This toggles the setting between MODE1 and MODE2.
Setting the method of
reference channel
selection using the
numeric keypad
section Press F3 (REF SEL MODE).
This toggles the setting between MODE1 and MODE2.
Setting the linkage
between snapshot
recall from the
numeric keypad
section and the
FlexiPad Press F4 (SS RECALL MODE).
This toggles the setting between MODE1 and MODE2.
Making the settings
relating to the lighting
of buttons when the
same signal is
assigned to more than
one cross-point button Press F5 (XPT TALLY).
This toggles the setting between MODE1 and MODE2.
Setting for the
FlexiPad snapshot
recall LAST X function Press F6 (FLX PAD SS LASTX).
This toggles the setting between ENBL and DSBL.
Setting for the fader
lever operation Press F7 (FADER CURVE).
This toggles the setting between MODE1 and MODE2.
Setting for the LAST
X button in the
numeric keypad
section Press F9 (KEY PAD LAST X).
This toggles the setting between ENBL and DSBL.
Setting for
manipulating
snapshot attributes
with the Flexipad Press F10 (MORE), then press F1 (FIX PAD ATRIB
MODE).
This toggles the setting between MODE1 and MODE2.
Setting to give priority
to the effect snapshot
name display in the
REGISTER menu
Press F10 (MODE), then press F2 (REGS MENU
MODE). Pressing the button toggles the setting between
MODE1 and MODE2.