12-10
Chapter 12
MISC Menu Operations
Color Correction
Setting the color correction and frame memory function
configuration
When the BKDS-7420 Color Correction Board and BKDS-2041 Frame
Memory Board are both installed, you can use their functions in the
following two ways.
• Using the color correction function along with the frame memory function.
• Using the color correction function alone.
When using the color correction function along with the frame memory
function, you can determine which function to apply first.
• Applying the color correction function before the frame memory function.
• Applying the color correction function after the frame memory function.
These settings can be made in a setup menu (see page 14-10).
Note
When using the color correction function alone, the signal to be selected with
a frame memory bus must be a primary input signal. Conversely, when using
the color correction function along with the frame memory function with the
selected signal not being a primary input signal, you cannot switch to the
setting for using the color correction function alone.
Assigning signals to cross-point buttons
To monitor signals after color correction, it is necessary to assign frame
memory 1 (FM1) and frame memory 2 (FM2) to cross-point buttons
beforehand using a setup menu (see page 14-62).
Summary of Contents for DVS-7300
