Sony DVS-7300, User Manual

Page: 453 / 606

Chapter 13 Interfacing With External Devices
13-7
Saving VTR Control Data in Registers
To save the VTR start point and stop point timecode values in a register,
use the following procedure.
1
In the numeric keypad section, recall the register in which you want to
save the start point and stop point.
For details of the operation, see the section “Accessing a Register”
(page 8-6).
2
Using the buttons in the DME control panel, search for the cue position
for the start point.
3
Press the ASP SKEW PERS (MARK IN) button to save the current
timecode as the start point.
4
In the same way as in step 2 , search for the stop point.
5
Press the LOC XYZ (MARK OUT) button to save the current timecode
as the stop point.
To save the VTR start offset point
You can save the time from when you press the RUN button in the key frame
control section, until the VTR starts playback as the start offset point. Carry
out this setting in the REGISTER menu.
For details, see the section “Displaying and Setting VTR Control Registers”
(page 9-18).