Sony DVS-7300, User Manual

Page: 191 / 606

Chapter 4 Basic Operations for Image Creation
4-107
Applying wipe modifiers
You can modify wipe patterns, for example to reverse the wipe direction, or
change the position of the pattern. Note, however, that depending on the
pattern you have selected, not all modifiers may be usable.
For details of possible combinations of wipe patterns and modifiers, see the
table on page 4-102.
Selecting the wipe direction
Positioning the pattern
To apply these modifiers, use the following procedure.
1
In the M/E-1 WIPE menu, select item 2 (DIRECT/POS).
The DIRECT/POS menu appears.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
AUTO
CENTER NORMAL
[CENTER]
POS
OFF
REVERSE
NORMAL/
REVERSE NORMAL
[CENTER]
POS
OFF
NORMAL
AUTO
CENTER
DIRECTION MAIN POSITIONER SUB POSITIONER
Function key indications in the DIRECT/POS menu
2
To specify the wipe direction, press one of F1 through F3, turning it on.
F1 (NORMAL): Carry out the wipe in the forward direction.
F2 (NORMAL/REVERSE): Carry out alternate wipes in opposite
directions.
F3 (REVERSE): Carry out the wipe in the reverse direction.
3
To position a pattern, press F4 (POS) for the main pattern, or F7 (POS)
for the subsidiary pattern, turning it on, then adjust the parameters.
To return the pattern position to the center of the screen
Hold down the SHIFT button (the indications above F4 and F7 both
change to “CENTER”), and press F4 (CENTER) or F7 (CENTER).
Knob Parameter Setting
1 H Pos Set the horizontal position of the pattern (–50.00 to
+50.00)
2 V Pos Set the vertical position of the pattern (–50.00 to
+50.00)
(Continued)