Sony DVS-7300, User Manual

Page: 484 / 606

14-28
Chapter 14 Setup
Setup Relating to Input/Output Signals (INPUT/OUTPUT Menu)
Setting Operation
Determining use of a switcher
output for input to the DMK-7000 Press F2 (DMK INPUT).
This cycles the setting through BKGD, V/K,
and NO USE.
White clip value for luminance
signal Press F3 (WHITE), turning it to reverse video,
and adjust with control knob 4.
Dark clip value for luminance
signal Press F4 (DARK), turning it to reverse video,
and adjust with control knob 4.
Video signal clip values (D2
systems only) Press F5 (VIDEO), turning it to reverse video,
and adjust the upper clip with control knob 3
and the lower clip with control knob 4.
Chrominance signal clip value
(D1 systems only) Press F5 (CHROMA), turning it to reverse
video, and adjust with control knob 4.
Adjusting the vertical blanking
interval Press F6 (V BLKG), turning it to reverse
video, and adjust with control knob 4.
Selecting the bit rounding
function for 10- to 8-bit
conversion (D2 systems only) Press F7 (BIT ROUND).
This toggles the setting on and off.
Selecting the bit rounding
function for luminance signal 10-
to 8-bit conversion (D1 systems
only) Press F7 (Y BIT ROUND).
This toggles the setting on and off.
Selecting the bit rounding
function for chrominance signal
10- to 8-bit conversion (D1
systems only) Press F8 (C BIT ROUND).
This toggles the setting on and off.
Settings in adjustment screen 2
Before proceding to the operation in the following table to make the
required setting, press F1 (OUTPUT SELECT) or turn control knob 2 to
move the cursor and select the input signal to which the settings apply.
Selectable output signals
PGM OUTPUTS, PST OUTPUT, ME-1 OUTPUT, ME-2 OUTPUT,
ME-3 OUTPUT, CLEAN OUTPUT, AUX BUS OUTPUT 1 to AUX
BUS OUTPUT 8, EDIT PVW OUTPUT, ASSIGN OUTPUT 1 to
ASSIGN OUTPUT 5