Sony DVS-7300, User Manual

Page: 546 / 606

14-90
Chapter 14 Setup
Setup Relating to Operations From the Control Panel
(OPERATION Menu)
To assign switcher registers to buttons
Use the following procedure.
1
In the OPERATION menu, press F10 (SHOTBOX).
The SHOTBOX menu appears.
2
If in the screen “SWITCHER” is not selected, press the cursor movement
button (
< ) to select it.
The menu appears as follows.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
M/E-3
M/.E-2
M/E-1
EFF
No.
S. S
No.
BUTTON
No.
P/P
DSK USER
RECALL
MODE RECALL
RECALL REGS REGION
#2 RECALL
Function key indications in the SHOTBOX menu (with “SWITCHER” selected)
3
Press F1 (BUTTON No.) or turn control knob 2 to align the cursor with
the number of the button to be assigned.
4
• To assign a snapshot register, press F2 (S.S No.), then enter the register
number with the numeric keypad.
• To assign a key frame effect register, press F3 (EFF No.), then enter the
register number with the numeric keypad.
5
If in step 4 you selected a snapshot register, press F4 (M/E-1) to F8
(USER) to select the sub-registers used.
When a key frame effect register is selected, the object of the selection is
not the recall, but the execution after the recall.
Repeat steps
3
to
5
as required, to assign the buttons.