Sony DVS-7300, User Manual

Page: 198 / 606

4-114
Chapter 4 Basic Operations for Image Creation
Wipes
F4 (ANGLE): rotate the pattern.
a) To avoid problems at the fader limits, depending on the angle, the pattern size is
automatically corrected.
F5 (SPEED): rotate the pattern at a constant angular speed.
a) To avoid problems at the fader limits, the pattern size is automatically increased
compared with the case in which the pattern does not rotate.
F6 (MAG): specify angle through which pattern turns through the
course of the transition.
a) To avoid problems at the fader limits, depending on the angle when the transition
completes, the pattern size is automatically corrected.
F7 (H MOD): modulate the pattern, giving a horizontal waviness to the
edge.
F8 (V MOD): modulate the pattern, giving a vertical waviness to the
edge.
Note
The F7 (H MOD) and F8 (V MOD) parameter settings are common to
the main and subsidiary patterns. Therefore, changing the settings for
one pattern automatically assigns the same values to the other pattern.
Knob Parameter Setting
1 Angle Rotation angle (–50.00 to +50.00) (maximum one
whole turn)
a)
Knob Parameter Setting
1 Speed Rotation speed (–50.00 to +50.00) a)
Knob Parameter Setting
1 Angle Pattern orientation when the transition starts (–50.00
to +50.00)
2 Magnitude Rotation through transition (–100.00 to +100.00)
(maximum plus or minus two whole turns)
a)
Knob Parameter Setting
1 Amplitude Set the modulation amplitude (0.00 to 100.00)
2 Frequency Set the modulation frequency (0.00 to 100.00)
3 Speed Set the modulation speed (–50.00 to +50.00)
Knob Parameter Setting
1 Amplitude Set the modulation amplitude (0.00 to 100.00)
2 Frequency Set the modulation frequency (0.00 to 100.00)
3 Speed Set the modulation speed (–50.00 to +50.00)