Sony DVS-7300, User Manual

Page: 524 / 606

14-68
Chapter 14 Setup
Setup Relating to Operations From the Control Panel
(OPERATION Menu)
KEY INV: The KEY
INV button in the key
control section of
each M/E bank (see
page 2-16)
NO ASSIGN: No function allocated.
KEY INVERT ON/OFF: Switches the key invert function
on or off. (Factory default setting)
MAIN MASK ON/OFF: Switches the main mask on or
off.
SUB MASK ON/OFF: Switches the subsidiary mask on
or off.
EDGE MATTE ON/OFF: Set this to ON to insert a signal
from the dedicated matte generator as key edge fill.
When this is set to OFF, the signal selected on the
utility bus is used for edge fill. Press the button, turning
it on, then adjust matte 1 with knobs 1 to 3: Luminance
(0.00 to 100.00), Saturation (0.00 to 100.00), and Hue
(0.00 to 359.99).
4H DROP ON/OFF: Toggle on and off the “4H DROP”
mode for key fill and key source.
Note
These settings are common to all M/E banks. (It is not
possible to make independent settings for different
banks.)
Programmable button Functions available for allocation
P/P NEXT
TRANSITION
BLANK: Unlabeled
button to the right of
the DSK2 button
(above the WIPE
button) in the
transition control
section of the PGM/
PST bank (3.5-M/E
panel) (see page 2-
22)
NO ASSIGN: No function allocated. (Factory default
setting)
NEXT TRANS ALL: When you press the button, as the
image for the next transition on the PGM/PST bank,
the background, and downstream keys 1, 2, 3, and 4
are simultaneously selected (the BKGD, and DSK1 to
DSK4 next transition buttons all light).
(Continued)