Sony DVS-7300, User Manual

Page: 48 / 606

2-16
Chapter 2 Location and Function of Parts
Mix/Effects Banks
Key control section
MATTE AUTO
SEL
KEY
2
KEY
1
BORD
OUT
LINE
DROP
BORD FILL
SPLIT
SHDW
LUM
LIN CLEAN CHR PTM
KEY
IMV
PROC
KEY
KEY KEY
MIX ON
KEY KEY
MIX ON
KEY CONTROL
KEY1 KEY2
1
2 3
4
Key Control Section
Each M/E bank has two keyers (1 and 2);
the buttons in this section select the keyer
1)
and then control the key operations.
1 Keyer delegation buttons
Press the KEY 1 button, turning it on, to
delegate the buttons in the key control
section to keyer 1, and the KEY 2 button
similarly for keyer 2.
On a BKDS-7011/7023, pressing one of
the keyer delegation buttons, turning it on,
not only delegates the buttons in the key
control section, but also delegates the
..............................................................................................................................................................................
1) In this manual, this is referred to as delegating the
buttons in the key control section to keyer 1 or
keyer 2.
cross-point buttons in the K row to the key
1 bus or key 2 bus as the case may be.
Holding down any one of these buttons for
at least one second outputs the key source
signal from the corresponding keyer to the
EDIT PVW bus. (“Show key” function)
For details, see page 14-38.
2
Key fill and key source
selection buttons
1 Keyer delegation
buttons
4
KEY INV button
5 Key insert/remove
buttons
7 Edge type selection
buttons
6
Key snapshot buttons
3
Key type selection
buttons
9
PROC KEY button
8 Key parameter
setting knobs and
displays