Sony DVS-7300, User Manual

Page: 149 / 606

Chapter 4 Basic Operations for Image Creation
4-65
4
Adjust the mask source parameters.
When you have selected a wipe pattern:
When you have selected a signal selected on the utility bus:
Knob Parameter Setting
1 Size Set pattern size (0.00 to 100.00)
2 Softness Set the degree of edge softness (0.00 to 100.00)
Knob Parameter Setting
1 Clip Set clip level on the mask signal (0.00 to 100.00)
2 Softness Set the degree of edge softness (0.00 to 100.00)
5
To invert the sense of the mask source, press F7 (MASK INVERT),
turning it on.
Using the processed key function
Use the following procedure to use a processed key on keyer 1 of the M/E-1
bank.
1
In the M/E-1 KEY 1 menu, select item 2 (FILL/SOURCE).
The FILL/SOURCE menu appears.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
KEY FILL PROCESSED KEY KEY SOURCE
SPLIT
AUTO
SELECT
KEY
BUS
4H
MATTE
KEY
BUS
4H
PROC
KEY
OFF
CLEAN
KEY
ON
KEY
ADJUST
PRESET
Function key indications in the FILL/SOURCE menu
2
Select the key fill and key source signals.
For details, see the section “Selecting the key source and key fill” (page
4-51).
3
In the FILL/SOURCE menu, press F8 (PROC KEY), turning it on.
(Continued)