Sony DVS-7300, User Manual

Page: 219 / 606

Chapter 4 Basic Operations for Image Creation
4-135
2
To specify the wipe direction, press one of F1 through F3, turning it on.
(For a downstream keyer wipe, you can also use the NORM, NORM/
REV and REV buttons in the downstream keyer control section.)
F1 (NORMAL): carry out the wipe in the forward direction.
F2 (NORMAL/REVERSE): carry out alternate wipes in opposite
directions.
F3 (REVERSE): carry out the wipe in the reverse direction.
Note
For a key transition, the forward and reverse executions may not be the
same as for a background transition. The direction setting has no effect
on a user programmable DME effect.
3
When using the pattern from the squeeze group, to apply the “AUTO
CENTER” positioning effect, press F5 (POS), turning it on, then adjust
the initial position of the pattern.
Knob Parameter Setting
1 H Pos Set the horizontal position of the pattern (–50.00 to
+50.00)
2 V Pos Set the vertical position of the pattern (–50.00 to
+50.00)
To return the pattern position to the center of the screen
Hold down the SHIFT button (the indication above F5 changes to
“CENTER”), and press F5 (CENTER).
Modifying the edge of the wipe pattern
To modify the edge of the DME wipe pattern, use the following procedure.
Note that it is not possible to use the border function on a user programmable
DME effect or for a key transition.