Sony DVS-7300, User Manual

Page: 485 / 606

Chapter 14 Setup
14-29
Carrying out setup relating to DMK-7000 output signals (DMK
OUTPUT menu)
You can use the two menu screens accessible from the DMK OUTPUT menu
for the following settings.
Settings in screen 1
You can make the same settings as in screen 1 of the SWITCHER OUTPUT
menu (see page 14-25) relating to the DMK-7000 output signals.
Settings in screen 2
You can make the same settings as in screen 2 of the SWITCHER OUTPUT
menu (see page 14-25) relating to the DMK-7000 output signals.
Note, however, there are the following differences between the two menus.
• Setting to determine use of a switcher output for input to the DMK-7000
does not apply to the DMK OUTPUT menu.
• In the DMK OUTPUT menu, you can set the vertical blanking interval for
each output signal individually.
To carry out the settings using the DMK OUTPUT menu, proceed as follows.
1
In the INPUT/OUTPUT menu, press F6 (DMK OUTPUT).
The DMK OUTPUT menu appears.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
OUTPUT
ADJUST2
OUTPUT
ADJUST1
Function key indications in the DMK OUTPUT menu
2
Carry out the operation in the same way as for steps 2 and 3 of the
operating procedure under the section “Carrying out setup relating to
switcher output signals (SWITCHER OUTPUT menu)” (see page 14-
25).
Output signals selectable for the settings made in screen 2
DSK1 to DSK4 PROGRAM OUTPUTS,
DSK1 to DSK4 PREVIEW/KEY OUTPUT, CLEAN OUT,
DME-I/F VIDEO OUTPUT, DME-I/F KEY OUTPUT