Sony DVS-7300, User Manual

Page: 467 / 606

Chapter 14 Setup
14-11
To carry out these settings, use the following procedure.
1
In the SYSTEM menu, press F4 (SYSTEM CONFIG).
The SYSTEM CONFIGURATION menu appears.
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
DMK
SWER
DMK
CONFIG
M/E-3
SYSTEM
CONFIG
SYSTEM PHASE
SWER
PGM
M/E-1
REMOTE
PANEL
PGM
MLT XPT
ASSIGN
FM&CCR
CONFIG
CASCAD PAIR
Function key indications in the SYSTEM CONFIGURATION menu
2
Carry out the operation in the following table to make the required
setting.
You may press F6 and F7 together to adjust the switcher and DMK-7000
output signal phases simultaneously.
Setting Operation
Selecting the system
configuration Press F2 (SYSTEM CONFIG).
This toggles the setting between SEPA and PAIR.
Selecting the DMK-7000
configuration Press F3 (DMK CONFIG).
This cycles the setting through CASCAD, PARA,
INDPND and DUAL.
Setting the switcher
program output Press F4 (SWER PGM).
This cycles the setting through M/E-1, M/E-2 and
M/E-3.
Adjusting the switcher
output signal phase
Setting the final bank
controlled through the
PANEL 2 connector of the
switcher Press F5 (REMOTE PANEL PGM).
Pressing this button cycles through M/E-1, M/E-2,
M/E-3, P/P, and AUX.
When you selected AUX, set an AUX bus number
with control knob 3.
Press F6 (SWER), turning it to reverse video, and
adjust control knob 4.
Adjusting the DMK-7000
output signal phase Press F7 (DMK), turning it to reverse video, and
adjust control knob 4.
Setting the color
correction and frame
memory function
configuration Press F9 (FM&CCR CONFIG) to display the CCR
CONFIGURATION menu.
For details, see the next section.
Multiple cross-point
assignment Press F10 (MLT XPT ASSIGN) to display the MULTI
XPT ASSIGN menu.
For details see page 14-13.