Sony DVS-7300, User Manual

Page: 307 / 606

Chapter 6 Frame Memory
6-13
3
Press F7 (PATTERN), and adjust the parameters.
To apply a pattern modifier to the selected pattern, press F10 (PATTERN
MODIFY), displaying the PATTERN MODIFY menu.
For details of the operation, see step 7 of the procedure in the section
“Using the main mask” (page 4-63).
4
Press F8 (POS), setting it to “ON”, and adjust the parameters to move the
pattern to the start position of the trail.
5
When you are ready to freeze the input video, press F1 (PAINT), turning
it on.
Writing to frame memory begins at this point.
6
Turn control knobs 1 and 2 to create the required trail.
7
Press F1 (PAINT) again, turning it off.
The image with trail is now written to memory.
Using a rotating hue for the paint color
When “MATTE” was selected as the input video, you can make the hue of
the matte color rotate as the trail is created; to do this, set F9 (HUE
ROTATE) to “ON”.
Knob Parameter Setting
name
1 H Pos Horizontal position (–50.00 to +50.00)
2 V Pos Vertical position (–50.00 to +50.00)
Knob Parameter Setting
name
1 Size Size of pattern (0.00 to 100.00)
2 Softness Degree of edge softness (0.00 to 100.00)
4 Pattern No. Pattern number (1 to 27)