Sony DVS-7300, User Manual

Page: 528 / 606

14-72
Chapter 14 Setup
Setup Relating to Operations From the Control Panel
(OPERATION Menu)
e) Making the settings relating to the lighting of buttons when the
same signal is assigned to more than one cross-point button:
Select the mode of button lighting to be used when one of the buttons
to which the same signal has been assigned is pressed.
MODE1: Of the buttons to which the same signal has been assigned,
only the button of the smallest number lights. (Factory default
setting)
MODE2: All the buttons to which the same signal has been assigned
light.
f) LAST X function setting for FlexiPad snapshot recall: Select
whether or not to disable the LAST X function, activated on each of
the M/E banks, when using the FlexiPad to recall a snapshot, by
entering 00 then pressing.
ENBL: Enable the “LAST X” function. (Factory default setting)
DSBL: Disable the “LAST X” function.
g) Fader lever operation settings: Select the way in which the lever
position and the progress of the transition are related.
MODE1: The transition progression is linear, according to the
position of the lever. (Factory default setting)
MODE2: The lever position and the transition progression are related
by an S-curve. The transition is more gradual when the lever is
close to the end of its travel.
h) Setting for the LAST X button in the numeric keypad section:
Select whether to enable or disable the LAST X function.
ENBL: Enable the LAST X function. (Factory default setting)
DSBL: Disable the LAST X function.
i) Settings for manipulating the snapshot attributes in the Flexipad
section
This changes the method of operation of the EFF DISS button and the
AUTO TRANS button in the Flexipad for each M/E bank, for
manipulating the snapshot attributes.
MODE1: This is used when saving snapshot attributes. The attributes
of the button which is lit are applied to the register.
MODE2: This is used when recalling snapshot attributes. When a
register is recalled, the snapshot is recalled according to the
attributes of the button which is lit. When a register is recalled
when the button is not lit, the snapshot is recalled with the
attributes attached to the register.