Sony DVS-7300, User Manual

Page: 107 / 606

Chapter 4 Basic Operations for Image Creation
4-23
5
If you selected a wipe or DME wipe, make the necessary settings.
For details of the settings, see the sections on the pages indicated in the
following table.
6
Use the transition control section to execute the transition.
• For a gradual transition using a wipe or dissolve: press the AUTO
TRANS button or use the fader lever.
• For an instantaneous transition: press the CUT button.
For more details, see the section “Executing a Transition” (page 4-31).
Selecting a different transition type for the background and
downstream key transitions
Reversing the above procedure, first select the transition type, then select
whether it applies to a background or key transition.
For example, to carry out a dissolve for the background transition and a wipe
for downstream key 1, use the following procedure.
1
In the transition control section, press the next transition selection button
BKGD, turning it on.
2
In the transition type selection section, press the MIX button, turning it
on.
3
In the downstream keyer control section, press the DSK 1 button, turning
it on.
4
Next in the downstream keyer control section, press the WIPE button,
turning it on.
5
Of the next transition selection buttons in the transition control section,
press the BKGD and DSK 1 buttons simultaneously.
The WIPE and MIX buttons both light.
Wipe “PGM/PST Wipes and Downstream Keyer Wipes” (4-116)
DME wipe “DME Wipe Settings” (4-131)