118
Settings
Before using Wi-Fi
To use Wi-Fi, turn on Wi-Fi and search
available Wi-Fi network, then connect it.
･
To access the Internet using Wi-Fi, connect to
Wi-Fi network in advance.
❖
Information
･
Make sure to receive enough signal strength for
using Wi-Fi. The signal strength of the Wi-Fi network
varies by the location of the terminal. Moving closer
to the Wi-Fi router might enhance the signal
strength.
■
Reception interference caused by
Bluetooth devices
Bluetooth devices and wireless LAN
(IEEE802.11b/g/n) devices use the same
frequency band (2.4GHz). If you use
Bluetooth devices near a wireless LAN
device, reception interference may occur or
the communications speed may lower.
Also, you may hear noise or have a
connection problem. Communication may
be interrupted or sound may be lost while
streaming data, etc. In these cases, do the
following:
･
Keep the terminal and Bluetooth device
to be connected wirelessly 10 or more
meters away from a wireless LAN device.
･
Within 10 meters, turn off the Bluetooth
device to be connected.
Turning on Wi-Fi
1
From the Settings screen (P.118),
tap
of Wi-Fi or drag it to the
right.
❖
Information
･
It may take a few seconds before the Wi-Fi
connection is on.
･
Alternatively, drag the status bar downwards and tap
to turn on Wi-Fi.
Connecting to a Wi-Fi network
1
From the Settings screen (P.118),
tap [Wi-Fi].
･
Available Wi-Fi networks or secured Wi-
Fi networks are displayed.
2
Select a Wi-Fi network to connect.
･
If you are trying to connect to a
protected Wi-Fi network, you are
required to enter the security key.
Summary of Contents for Docomo XPERIA Z SO-03E
Page 1: ...13 2 INSTRUCTION MANUAL ...
