32
Before Using the Terminal
The docomo mini UIM card is an IC card
recorded user information such as your
phone number etc.
･
You can use the terminal with docomo mini
UIM card. If you have a UIM or FOMA card,
bring it to a docomo Shop to replace.
･
When docomo mini UIM card is not inserted
to the terminal, some functions are not
available.
･
For details on docomo mini UIM card, refer to
the docomo mini UIM card manual.
･
When inserting/removing the docomo mini
UIM card, make sure to power off the terminal.
Do not connect the AC adapter.
❖
Information
･
Please be careful not to touch or scratch a metal part
(IC) when you handle the docomo mini UIM card.
Doing so may cause malfunction or damage.
■
Security codes of the docomo mini
UIM card
There is a security code called PIN code in
the docomo mini UIM card. The code is set
to "0000" at subscription, which you can
change by yourself (P.146).
1
Insert the tip of your finger into
the groove at the bottom of the
terminal, and lift up the back cover
(P.26).
2
Remove the battery pack and
microSD card, place the tip of your
finger on the projection (
) at the
edge of the tray, and pull out the
tray straight, then insert your
docomo mini UIM card into the
tray, with the metal (IC) part
facing down, and then press the
tray with the docomo mini UIM
card straight to the end.
･
Check the orientation of corner cut.
docomo mini UIM card
Inserting docomo mini UIM
card
Summary of Contents for Docomo XPERIA Z SO-03E
Page 1: ...13 2 INSTRUCTION MANUAL ...
