EM330D User Manual
A Special Purpose Inverter for Hoisting
36
6 Parameter Tables
6.1
Format of Parameter Tables
13 groups of parameter of EM330D: F0, F1, F2, F3, F4, F7, F9, Fb, FC, Fd, FE, C0,
and E0, 32 items in each group.
F0~FE are function setting parameters which consist of two sections.
Section 1: F0~F4, general parameters.
Section 2: F7~FE are advanced parameters.
Group C0 are status monitoring parameters.
Group E0 are fault monitoring parameters.
When F0-27=0, the inverter only displays the parameters of Group F0~F4, C0, and E0.
When F0-27=1, the inverter displays all parameters.
Column 1: the number of the parameter.
Column 2: the function of parameter.
Column 3: the range of parameter.
Column 4: the parameter unit.
Column 5: the parameter default. For instance, X represents that the parameter default
varies with the power ratings of inverter. The defaults of some parameters vary with
the options of F4-28 application macros, details as shown in 6.2, and 7.5.
Column 6: the type of parameter (whether the parameter is editable or not).
Details shown as followings:
“●”: Parameter editing is permitted when the inverter is running.
“
〇
” : Parameter editing is prohibited when the inverter is running.
“X”: The parameter is read only.
Unit and Its Abbreviation
HOUR
Hour
m
Meter
%
Percentage
★
SQRT
Square Root
min
Minute
mm
Millimeter
rpm
Revolutions
per minute
A
Ampere
S
Second
Hz
Herz
MAX
Maximum
V
Voltage
mS
Millisecond
kHz
Kiloherz
MIN
Minimum
SECT
Program
Section
mH
Millihenry
kW
Kilowatt
bps
Bit per second
★
The basic value of percentage is the rated value.
