Siemens SIDOOR AT40, System Manual

Page: 318 / 337

Appendix
A.1 Profiles and adjustment ranges
AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ATD400T
318
System Manual, 06/2016, A2B00096162-AN
A.1.8.1 SIDOOR ATD4xxW
The default values are automatically set to the high limit when the high limit is exceeded.
Accordingly, the actual default values may differ from the default values in the table below.
Table A- 19 Parameters SIDOOR MDG400NMS L / R
Parameters Parameter ID Unit Profile 1*
Creep distance OPEN p3660 mm 30
Cutter distance OPEN p3661 mm 30
Creep distance CLOSE p3662 mm 20
Cutter distance CLOSE p3663 mm 40
Maximum speed OPEN p3664 mm/s 600
Creep speed OPEN p3665 mm/s 40
Cutter speed OPEN p3666 mm/s 60
Initial speed OPEN p3667 mm/s 90
Maximum speed CLOSE p3668 mm/s 177
Creep speed CLOSE p3669 mm/s 60
Cutter speed CLOSE p3670 mm/s 40
Initial speed CLOSE p3671 mm/s 90
NDG speed (reduced) p3672 mm/s 177
Acceleration ramp OPEN p3673 mm/s2 1300
Braking ramp OPEN p3674 mm/s2 600
Reverse ramp OPEN/CLOSE p3675 mm/s2 1200
Acceleration ramp CLOSE p3676 mm/s2 500
Braking ramp CLOSE p3677 mm/s2 500
Reversing ramp CLOSE/OPEN p3678 mm/s2 850
Continuous torque (power) OPEN p3679 A 1
Continuous torque (power) CLOSE p3680 A 1
Cutter press-on torque p3681 A 3
Static opening force p3682 N 75
Static closing force p3683 N 75
Static cutter force CLOSE p3684 N 75
Static NDG force (reduced) p3685 N 75
Limit energy close p1202 J 4
Limit energy open p1203 J 4
Limit energy NDG p1204 J 4
* Default profile (this profile is automatically loaded at the first commissioning)