AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ATD400T
System Manual, 06/2016, A2B00096162-AN
17
Product family
3
SIDOOR
Door control system is the general term for a controller of an access system.
The SIDOOR product family is primarily intended for operating sliding doors. Different
versions of SIDOOR controllers enable both horizontal and vertical doors to be operated.
Door control systems are characterized by the fact that there are always two defined states:
namely for the open and closed positions of the door. The door is always controlled between
these two positions in accordance with the guidelines of the respective application.
In a defined learn run initiated by "one-button operation", the door system independently
determines the values for the door width, the dynamic door weight and the drive direction of
the geared motor, and stores these data in a non-volatile memory.
Overview of the product family
①
Controller
④
Optional additional unit (e.g. SIDOOR Service Tool, SIDOOR
Software Kit)
②
Geared motor
⑤
Accessories
③
Power supply
⑥
Sliding door
Image 3-1
System setup
