Connecting and commissioning
AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ATD400T
288
System Manual, 06/2016, A2B00096162-AN
Parameter assignment for special applications
The drive values can be matched to the individual door for specific applications with the aid
of the integrated terminal module or the SIDOOR Service Tool (optional). Parameters can
also be changed with the aid of the SIDOOR User Software (optional, part of the SIDOOR
Software Kit). Its operation is described in the Appendix to these instructions. Simple settings
can also be made with the three buttons and the 7-segment display on the controller (see
Section Using the minimal editor (Page 113)).
The parameter changes are always accepted by the controller in normal operation with the
door at a complete stop.
Note
After the optimal parameter settings have been determined, they can be noted in the
configuration record (see Appendix Configuration record (Page 326)). These records should
also be kept at hand when asking questions on the Hotline.
