Shihlin electric SL3 Series, User Manual

Page: 172 / 211

Appendix 1 Parameter table
Appendix 168
Parameter
Number
Group Name Setting Range Default Page
P.149 04-14 Speed 15 Same as 04-03 99999 99
P.150 10-08 Restart mode selection
X0：No frequency search.
0 140
X1：Reserved
X2：Decrease voltage mode
0X：Power on once.
1X：Start each time.
2X：Only instantaneous stop and restart
P.151 10-03
Zero-speed control
function selection 0: Off.
0 139
1: DC voltage braking
P.152 10-04
Voltage at zero-speed
control
0～30.0% 5.0% 139
P.153 07-10
Communication alarm
action 0：Alarm and stop freely
1 114
1：No alarm and continuing to operation
P.154 07-07
Modbus communication
format
0：1、7、N、2 (Modbus, ASCII)
4 114
1：1、7、E、1 (Modbus, ASCII)
2：1、7、O、1 (Modbus, ASCII)
3：1、8、N、2 (Modbus, RTU)
4：1、8、E、1 (Modbus, RTU)
5：1、8、O、1 (Modbus, RTU)
6：1、8、N、1 (Modbus, RTU)
P.155 06-08
Over torque detection
level
0～200.0% 0.0% 110
P.156 06-09
Over torque detection
time
0～60.0s 1.0s 110
P.157 03-17
Digital input terminal filter
time
0～2000 4 94
P.158 03-18
Digital input terminal
enable when power on
0: When power on digital terminals work directly
0 95 1: When power on digital terminals work after switch
off then on
P.159 10-17
Energy-saving control
function 0: Off.
0 145
1: Energy-saving mode.
P.161 00-07 Multi-function display
0: Output AC voltage (V)
0 50
1: DC bus voltage. (V)
2: Inverter temperature rising accumulation rate (%)
3: Target pressure of the constant pressure system
(%)
4: Feedback pressure of the constant pressure system
(%)
5: Running frequency (Hz)
6: Electronic thermal accumulation rate (%)
8: Signal value (mA) of 3-5 input terminals (mA/V).
9: Output power (kW).