Shihlin electric SL3 Series, User Manual

Page: 49 / 211

System parameter group 00
PARAMETER DESCRIPTION 47
Group No. Name
00-21 P.300 Motor control mode selection
02-25 P.198 Terminal 3-5 minimum input current/ voltage
02-26 P.199 Terminal 3-5 maximum input current/ voltage
02-27 P.196
Percentage corresponds to terminal 3-5 minimum input current/
voltage
02-28 P.197
Percentage corresponds to terminal 3-5 maximum input current/
voltage
02-61 P.141
Polarity of percentage corresponds to terminal 3-5 current/ voltage
signal
05-01 P.302 Motor rated power
05-02 P.303 Motor poles
05-03 P.304 Motor rated voltage
05-04 P.305 Motor rated frequency
05-05 P.306 Motor rated current
05-06 P.307 Motor rated rotation speed
05-07 P.308 Motor excitation current
05-08 P.309 IM motor stator resistance

5: User registered parameter 15-00~15-19(P.900~P.919) and the parameters set in 15-00~15-19(P.900~P.919)
and the parameters in table 1 above will not be restored to default values. After parameters are restored,
00-02(P.996~P.999) is reset to 0.

6: User registered parameter 15-00~15-19(P.900~P.919) and the parameters set in 15-00~15-19(P.900~P.919)
and the parameters in table 1 and table 2 above will not be restored to default values. After parameters are
restored, 00-02(P.996~P.999) is reset to 0.
Note: When the parameter is restored to default value or some of the parameters are restored to default value, be sure
to wait for the screen to display , which means that it’s complete, and then perform other operations.