Shihlin electric SL3 Series, User Manual

Page: 174 / 211

Appendix 1 Parameter table
Appendix 170
Parameter
Number
Group Name Setting Range Default Page
P.182 08-14 Upper integral limit 50Hz system:0～120.00Hz 50.00Hz
132
60Hz system:0～120.00Hz 60.00Hz
P.183 08-15
Deceleration step length when
stable
0～10.00Hz 0.50Hz 132
P.184 02-24
Terminal 3-5 disconnect
selection
0: Off
0 78
1: Inverter decelerates to 0Hz, multi-function
digital output terminal set off alarm
2: Inverter stops immediately, and keypad
displays “AErr” alarm
3: Inverter runs continuously according to the
frequency command before disconnection.
Digital output terminal will set off alarm.
P.185 02-06 Proportional linkage gain 0～100% 0% 76
P.188 00-01 Firmware version Read only --- 45
P.189 00-24 50Hz/60Hz switch selection
0: Frequency related parameter default value is
60Hz.
0
68
1: Frequency related parameter default value is
50Hz.
1
P.196 02-27
Percentage corresponds to
terminal 3-5 minimum input
current/ voltage
0%～100.0% 0.0% 78
P.197 02-28
Percentage corresponds to
terminal 3-5 maximum input
current/ voltage
0%～100.0% 100.0% 78
P.198 02-25
Terminal 3-5 minimum input
current/ voltage
0～20.00 mA /V 0.00V 78
P.199 02-26
Terminal 3-5 maximum input
current/ voltage
0～20.00 mA/V 10.00V 78
P.204 02-63 PWM signal duty cycle
0: automatically detects the period of input PWM
pulse
0 84
1~1000ms: set the PWM duty cycle value input
into terminal STF
P.219 01-40
Remote function acc/dec time
selection
0：Use default acc/dec time（same as regular
mode）
0 73
1：Use second acc/dec time
P.223 08-18 Analog feedback signal bias 0～100.0% 0.0% 132
P.224 08-19 Analog feedback signal gain 0～100.0% 100.0% 132
P.225 08-03 PID target value from keypad 0～08-43（P.251） 20.0% 131
P.226 10-55
Reciprocating machine function
selection 0：Off
0 148
1：Turn on reciprocating machine function
P.227 10-56 Reciprocating forward limit time 0~3600.0s 0.0s 148
P.228 10-57 Reciprocating reverse limit time 0~3600.0s 0.0s 148