Shihlin electric SL3 Series, User Manual

Page: 80 / 211

Analog input and output parameter group 02
PARAMETER DESCRIPTION 78
5.3.2 Auxiliary frequency

Frequency can be adjusted and synthesized flexibly to meet the different control requirements in different
scenarios.
Parameter Name Default Setting Range Content
02-07
P.240
Auxiliary frequency 0
0 Off
2
Output frequency = basic fre auxiliary frequency
(given by terminal 3-5)
4
Output frequency = basic frequency - auxiliary frequency
(given by terminal 3-5)
6
Output frequency = proportional linkage signal (given by
terminal 3-5)
Auxiliary frequency

When output frequency is lower than 01-01(P.2),it equals to lower limit frequency 01-01(P.2). When output
frequency is higher than 01-00(P.1), it equals to upper limit frequency 01-00(P.1).
Note: 1.Basic frequency command is given by keypad, communication or multi-speed terminal.
2. For proportional linkage signals, please refer to the description of parameter 02-06(P.185).
3. When use terminal 3-5 analog (voltage/current) signal as proportional linkage signal input terminal, please refer
to parameter 02-20(P.17). For the setting of external analog signal frequency range, please refer to parameter
02-21(P.39).
Setting