Shihlin electric SL3 Series, User Manual

Page: 191 / 211

Appendix 1 Parameter table
Appendix 187
Group
Parameter
Number
Name Setting Range Default Page
08-19 P.224
Analog feedback signal
gain
0～100.0% 100.0% 132
08-43 P.251
PID pressure range (Bar)
setting
1.0~100.0 100.0 135
08-45 P.253
Analog signal feedback
loss detection time
0～600.0 0.0 s 135
08-46 P.254
Analog signal feedback
loss action selection
0：Alarm AErr and inverter stop freely
0 135 1：Slow down to stop then alarm AErr
2：Alarm AErr and continue operation
10-00 P.10
DC brake operating
frequency
0～120.00Hz 3.00Hz 138
10-01 P.11 DC brake operating time 0～60.0s 0.5s 138
10-02 P.12
DC brake operating
voltage
0～30.0% 4.0% 138
10-03 P.151
Zero-speed control
function selection 0: Off.
0 139
1: DC voltage braking
10-04 P.152
Voltage at zero-speed
control
0～30.0% 5.0% 139
10-05 P.242
DC brake before inverter
start 0: Off
0 139
1: Before starting operate DC brake first.
10-06 P.243
DC brake time before
inverter start
0～60.0s 0.5s 139
10-07 P.244
DC brake voltage before
inverter start
0～30.0% 4.0% 139
10-08 P.150 Restart mode selection
X0：No frequency search.
0 140
X1：Reserved
X2：Decrease voltage mode
0X：Power on once.
1X：Start each time.
2X：Only instantaneous stop and restart
10-09 P.57 Restart idling time
0～30.0s
99999 140
99999: Off.
10-10 P.58 Restart rising time 0～60.0s 10.0s 140
10-11 P.61 Remote control function
0: Off
0 141
X1：Remote control function, frequency save in memory
X2：Remote control function, frequency won’t save
X3：Remote control function, frequency won’t save, clear
frequency setting every time STF/STR “turn off”.
X4：Remote control function, frequency save in memory
every 5s
1X：Frequency command range 01-01(P.2)~01-00(P.1),
frequency command value from RH,RM setting